Our Products

Rafi Lumotast 22 Emergency Stop Button

The emergency stop pushbuttons comply with IEC 60 204, IEC 60 073, IEC 60 947, and VDE 0113 Part 1. They are protected against unauthorized actuation by a positively guided mechanical movement sequence following DIN EN ISO 13850. To protect against accidental actuation, a pressure point must be overcome and the pushbutton engages in the pressed position. Due to the shape of the actuating element, the emergency stop push button is protected against blocking. This means that an initiated emergency stop procedure cannot be interrupted by jamming objects.

The compact LUMOTAST 22 emergency stop with quick-connect terminals is ideal wherever an emergency stop or emergency off is required and space is tight in front of or behind the front panel. This emergency stop is also available with a PCB terminal, see RAFIX 22 FS+ control component range.

Main areas of application

  • Measurement-control-regulation
  • Mechanical and system engineering
  • Vehicle construction

Special features

  • Mounting hole diameter 22.3 mm
  • Night design: illumination of the arrows possible
  • Low mounting depth of 17.6 mm
  • Water jet protection class IP 65 on front
  • Switching elements with silver contacts
  • Contact configurations: 2 NC, 2 NC + 1 NO
  • Quick-connect terminal
  • Complies with DIN EN ISO 13850